excellent! But Im still not sure if the butterfly for the secondary is supposed to be fixed??( I kinda doubt it but.....) even moving the secondary rod that controls it will only make it wiggle, not open.

Should I dissassemble that 'middle' part of the carb, ie between the part with the bowl and where it mates to the manifold? The upper surface of this is what would require surfacing?


I should have done the heat risers when I had the manifoldsoff, now it looks a bit tough to get to with out removing them, is it possible still?

Sorry for the questions, but I'd rather do it slowly and right then rush through and do it over....

Marc