View Single Post
  #2  
Old 05-29-2007, 08:49 PM
mespe's Avatar
mespe mespe is offline
benzbonz
 
Join Date: Feb 2005
Location: Cleveland, Ohio
Posts: 1,848
Well my TPS was mal-aligned as some P.O. idiot messed with the factory setting on the throttle valve. New readers,,, take note,,, IF your TPS sensor fails at the conenctor i.e. open circuit at idle, check the butterfly adjustment on the throttel valve,,, DO NOT CHANGE IT, it's factory set,,, just check to see if someone else changed it before you go and pull the throttle body off the valve to be able to remove the TPS
__________________
Closing the store
Benzbonz.biz
on your smart phone or tablet.
Reply With Quote