View Single Post
  #8  
Old 12-23-2001, 02:52 AM
vinamg vinamg is offline
Registered User
 
Join Date: Dec 2000
Posts: 368
I've never seen any o-rings on any of the injectors. All you do is slide the seal (I use WD40) over the stem until it sits securely in the injector groove. BTW you need to push the seal, don't pull it by the plastic piece because it willl come off. If it comes off you need to remove the seal from stem, put back the plastic cover and try again.

Vin
Reply With Quote