View Single Post
Old 12-27-2001, 12:02 PM
MikeTangas's Avatar
MikeTangas MikeTangas is offline
Senior Member
Join Date: Apr 2000
Location: So. Cal
Posts: 4,430
19mm socket and box for the flex disk bolts, 17mm socket for the 4 cross member bolts, same for the two tranny mount to cross member bolts I think. I.m not sure, but I think the tranny mount to tranny nut is a 19mm. He will have to support the tranny with a jack, be sure to have a piece of wood between the jack and tranny pan ( I use a 2x4 caddie corner across the pan). Will also need a prying tool, pry bar or large screw driver to separate the yoke from the flex disk.
Mike Tangas
'73 280SEL 4.5 (9/72)- RIP
Only 8,173 units built from 5/71 thru 11/72

'02 CLK320 Cabriolet - wifey's mid-life crisis

2012 VW Jetta Sportwagon least its a diesel

Non illegitemae carborundum.
Reply With Quote