Hello Forum gurus,

I have been having issues with my windshield washer system. The wipers work but the washer portion does not. The spray nozzles were clogged, the hose leading to the water bottle reservoir looked old and cracked and the washer pump was suspect.
This weekend I decided to tackle rebuilding the system. Here’s were I could use some help. I have installed a new washer pump, replaced all the spray nozzles and hoses and tried out the system but it still does not work.
I figure it must be electrical. I have been looking at schematics and cannot locate the line for the washer pump? It shows the wiper motor line but not the washer pump line. Are they the same unit? I’m also wondering if there may be a fault at the turn signal switch. I’m not sure what to tackle 1st and how? I have a volt meter but I have never used it so I cannot be sure were in the line it has failed? As you can see I must be a newbie if I never used a volt meter!!! You have to start sometime. Any help would be great!!!!

Thanks