View Single Post
  #7  
Old 06-26-2007, 12:43 AM
Uncle Possum Uncle Possum is offline
Las Vegas Benz Driver
 
Join Date: Jun 2007
Location: Las Vegas, Nv
Posts: 91
My Banjo Bolt was loose, and the line was leaking

After reading several posts about the banjo bolt, I pulled mine to clean it. I found that it wasn't really clogged so much as it was only finger tight. The other thing that I noticed is that the line had been cut and patched together using a piece of over-sized tubing with tie-wraps for clamps. After cleaning it up and tightening things up as much as I could , I did notice an improvement in performance. Do I replace the tubing, or the whole assembly?
Reply With Quote