1996-97 E300 Diesel Plastic injection pump lines, OM606.912


#32
Item Number: 6050701432
Main Category: MB
Sub Category: Diesel Injection
Description: line from (fuel heater) thermostat to prefilter
Weight: 0.300

#56
Item Number: 6050700732
Main Category: MERCEDES BENZ
Sub Category: Diesel Injection
Description: line from prefilter to shut-off valve
Weight: 0.240

#74
Item Number: 6050700832
Main Category: MERCEDES BENZ
Sub Category: Diesel Injection
Description: Line from fuel feed pump to shut-off valve
Manufacturer: OES
Weight: 0.240

#83
Item Number: 6060700432
Main Category: MERCEDES BENZ
Sub Category: Diesel Injection
Description: line from feed pump to fuel filter
Weight: 1.000

#95
Item Number: 6050701532
Main Category: MERCEDES BENZ
Sub Category: Diesel Injection
Description: Line from fuel filter to shut-off valve
Weight: 0.240

#119
Item Number: 6060700532
Main Category: MERCEDES BENZ
Sub Category: Diesel Injection
Description: line (return) from injection pump to fuel filter
Weight: 0.220


Item Number: 6010920105
Main Category: MB
Sub Category:
Description: FACTORY PRE FILTER
Weight: 0.300


Item Number: 6019970148
Main Category: MB
Sub Category:
Description: FACTORY PRE FILTER O RING
Weight: 0.010

NOTE:
You should replace the fuel filter bolt O-rings at this time.

Item Number: 0099978148
Main Category: MERCEDES BENZ
Description: SEAL RING
Weight: 0.050

Item Number: 0099979248
Main Category: MERCEDES BENZ
Sub Category: Diesel Injection
Description: SEAL RING
Weight: 0.030


Seal ring, shutoff valve to injection pump
MB# 0219977548

Seal ring, intake cross over pipe x2
MB# 6069970645

Seal ring, intake cross over pipe to intake manifold x2
MB# 6049970045

Gasket, intake manifold, up to engine# 910 021945, 912 006209
MB# 6061410080

Gasket, intake manifold, as of engine# 910 021946, 912 006210
MB# 6061410180

OM60_series IP delivery valve reseal
OM60_series IP delivery valve reseal - PeachParts Mercedes ShopForum



NOTE – All prices on special order parts subject to change without notice.

Attached Thumbnails

 

__________________
ASE Master Mechanic
asemastermechanic@juno.com

Prototype R&D/testing:
Thermal & Aerodynamic System Engineering (TASE) Senior vehicle instrumentation technician.
Noise Vibration and Harshness (NVH).
Dynamometer.
Heat exchanger durability.
HV-A/C Climate Control.
Vehicle build.
Fleet Durability
Technical Quality Auditor.
Automotive Technical Writer

1985 300SD
1983 300D
1984 190D
2003 Volvo V70
2002 Honda Civic

https://www.boldegoist.com/