Quote:
Originally Posted by bryn_p
I replaced the leaking cylinder but the roof will still not go up. When I checked the pump, the fluid was right down to the bottom of the container so I filled it back up with fluid from MB but still the roof will not raise.
I can see the roll bar moving very slightly (couple of mm) when the switch is activated, but no part of the roof actually moves.
Bryn.
|
Bryn,
You mentioned that after you fixed the leaking cylinder that the fluid was at the bottom of the container and that you filled the reservoir. The reservoir only holds about 250 ml when it is filled to the min/max mark and the entire system holds 1.25 liters. In order for the system to work properly you may have to cycle the system more than several times in order to refill it completely. Please read
Hydraulic system fluid flush and renew