View Single Post
Old 01-06-2002, 05:49 PM
Gilly's Avatar
Gilly Gilly is offline
Registered User
Join Date: Mar 2001
Location: Evansville WI
Posts: 9,616
If this is like a US 102 engine (2.3) the temp sensor for the aux fan is on top of the cylinder head adjacent to the oil cap. Should have 2 connectors on it, a 1 pin and a 2 pin connector. remove the 2 pin connector and with the key ON the fan should run. if it passes this test, and the engine temp has been observed to pass 110 degrees C without the fan running, then replace this sensor.
Reply With Quote