View Single Post
Old 01-08-2002, 08:20 AM
Posts: n/a
I've never removed these switches, but I think they're like the ones on the 123 cars, if so, you can carefully move the outer end tabs toward the switch while prying up. They will pop out, remember, this is if they have the spring tabs on the ends of the switch.

The shift boot is about $6 and is replaced by peeling off the base with your fingernails, inverting, then use an open end wrench to loosen the locknut on the shift knob. Screw off the shift knob, slip the old cover off, clean everything and slip the new one on by reversing the steps.

Good luck,
Reply With Quote