Many thanks to all that responded. Thought turning steering wheel maybe a joke but, what the hay, tried it and it didn't solve problem, lights still on. No, not in limp mode, had prior experience with that problem, ended up replacing ignition control module. Checked all fuses including fuse in OVP, all good. Auto runs great, therefore concluding probably fault associated with dead battery. I did have to re-enter radio code. I have heard that low voltage will cause ASR and ABS lights to stay on but, no mention of roll bar light. I will rig up LED test device as described in forum and I have located the 16 connector for reading codes, never done it before and don't know what I am doing but, what the hell. Any help regarding the code reading, erasing, etc. issue would be appreciated.