Thread: Flat Battery
View Single Post
  #3  
Old 04-28-1999, 11:57 PM
Benzmac
Guest
 
Posts: n/a
Someone needs to perform an amperage draw test on the car. To do this they will need a Fluke 77 or higher multimeter. Just take loose the - battery terminal and put the two wires of the meter between them. The reading should be 300 to 400 ma. If its higher there is a drain on the system somewhere.

------------------
Benzmac:
ASE CERTIFIED MASTER AUTO TECHNICIAN
LEAD TECHNICIAN FOR 14 BAY FACILITY
MERCEDES SPECIALIST 8 YRS
PARTNER IN MERCEDESSHOP.COM