View Single Post
  #5  
Old 08-26-2007, 10:44 AM
lee polowczuk lee polowczuk is offline
Registered User
 
Join Date: Oct 2004
Location: Baton Rouge La
Posts: 2,632
Aux fan is ok... just one..

All the debris cleaned out..

I am going to drain a bit of water from the block, and put the remaining coolant in... with some Wetter Water..

I think we will be fine....

For those who have to do a water pump: Either get the Snap On 13mm wobble.... or

here's what I did... I had a 1/4 inch drive 6" wobble extension. I went to Sears and got a 1/4" drive 13mm socket for less than 3 dollars. That got it.

When I re-assembled, I did the tough bolt first, starting it by hand... doing that much of the way... and then actually used a 13mm closed end wrench to tighten. I could have used the wobble extension, but the socket fell under the car and I was too tired to go after it.

This took me 6.5 hours.. I wasted too much time trying to get the bolt out with 3/8" drive like some have. I also had to go to Sears.

I think I could do it in 3.5 hours the next time.
__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)

1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus

1994 e320 Cabriolet 108k



1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it


[/SIGPIC]
Reply With Quote