View Single Post
  #2  
Old 09-13-2007, 09:59 PM
Tomguy's Avatar
Tomguy Tomguy is offline
Vintage Moderator
 
Join Date: Aug 2002
Location: near Scranton, PA
Posts: 5,407
5/8" ID fuel injection hose to withstand the high pressure. Available at any auto place. 4' is more than enough to replace:
- 8 injector lines
- Line from fuel rail (on the 108 it's on the frame rail to the metal line that goes between the PS pump/distributor)
- 2 lines from said rail to fuel rails
- Line to CSV
- Line from 2 fuel rails to pressure regulator
- Line from pressure regulator to dampener
- Line from dampener to return line
- Map line (while you're at it if you have it left over)

-- Make sure to buy FUEL CLAMPS as opposed to WORM CLAMPS. Fuel clamps like the stock ones. You'll need 8 unless you have the special tool to re-crimp the lines at the bottom of the injectors (doubtful)
__________________
Current:
2021 Charger Scat Pack Widebody "Sinabee"
2018 Durango R/T

Previous:
1972 280SE 4.5
2014 Jeep Grand Cherokee Limited "Hefe", 1992 Jeep Cherokee Laredo "Jeepy", 2006 Charger R/T "Hemi"
1999 Chrysler 300M - RIP @ 221k
Reply With Quote