Quote:
Originally Posted by sgaar
It is very possiblt I am doing something wrong. The nut I am talking about is the one circled in red on the attached.
On each side of the nut there is part of the trans flange that prevents me from getting a good wrench on the nut.
|
Sorry I think my daughter took my camera. But I was just out there and I can get a 19mm Craftsman combination wrench on this nut. The box end of the wrench will fit inside the flange but may be difficult to get past the flex coupling the open end of the wernch will also fit betwwen the flanges as long as you apprach straight from the back. Once the nuit is loose the open end will still grab high on the nut from the sides.
Unless you are using one of those wrenches from a Civel war Iron clad boat, you shouldent have a problem.
Also you did remove the aft cross member part # 11 in your picture??
John Roncallo