View Single Post
Old 01-27-2002, 11:10 AM
Posts: n/a
Windshield Wiper Fluid not working right

Everything was fine until I got my car painted. When I tried to use the wiper fluid only the squirt on the passenger comes out 10% power and 0% on the drivers side. When I lifted the hood and turned the wiper pump on again, I noticed water pouring out of the passerger corner of the hood (see photo - it come out that corner). So the hose that connects the squirts from the reservoir must either be leaking or disconnected slightly (hence water flowing from inside the hood down to the corner), but it is hard for me to tell what the problem is because everything seems to be inside the hood hard to reach.

Does anyone understand how the hose is connected underneath there ti the two jets and how to get at it? Thanks.
Attached Thumbnails
Windshield Wiper Fluid not working right-mvc-001f.jpg  
Reply With Quote