just as an addition to ScottinSoCal the top seal for the soft top is one piece and once it is installed you just push a razor through the rubber at the hinge otherwise it will pull out everytime you fold the roof.
also remember the very soft rubber (more like sorbo rubber) seal that goes between the soft top and the top of the folding hinge. this one is glued onto the roof and then you use the 1/8th inch wire that runs from the screw in the front of the softop to the sticky out bit of hinge just behind your head to tension it. then everytime the roof is locked down and tensioned the wire pulls tight and pulls the top sorbo ruber down onto the top of the hinged section.
gets rid of any remaining wind noise
cheers
Barri
|