Quote:
Originally Posted by JimF
... It might be easier to construct the "home-brew" reader in MENU#2. Then you can use it on any pin. The "hard" part is the small connector pins to properly interface into the 38 pin Diag Connector.
|
No problem. Will build the 'Home Brew Box' today (assuming the local 'Shack has all the parts). The schematic is straightforward, however when complete, which pins of the 38-pin Diagnostic Connector are J1, J2 & J3 (as shown on the schematic) connected to? I'm assuming that once the 'Home Brew Box' is connected to the 38-pin Diagnostic Connector, operation is identical to the installed MB switch X11/21s1.
Cheers,
Jeff