View Single Post
Old 05-23-1999, 06:39 PM
Posts: n/a
While it may be the sending unit in the tank, don't rule out the possibility of a wiring problem, such as a bare spot somewhere in the harness. I would expect cornering to have more of an effect than simple bumps, if it was the sending unit, as it tends to make the liquid in the tank slosh around, moving the float arm, whereas the same liquid tends to damp the fast motion causing the intermittent condition. I'd be looking at wiring and connections first. If all else fails, then I'd look at the sending unit itself. Good luck with it.