Quote:
Originally Posted by vstech
15.00 is a bit high for 2.2lbs of acid... citric acid that is... anyway, you should not loose too much if you just pull the water pump. a lot will remain in the block.
|
Well that's great news that I don't have to pull the block drain entirely and dump out all the citric acid. Ill just bucket my citric acid solution and dump it back in when the time comes.
I have a couple lingering questions though -
1.a) Ive read the water pump bolts tend to break. I will make the special 10mm box wrench as Brian has suggested in threads past. BUT, how can I play all my best cards to make sure they dont snap? Ill PB blast them like heck and use the ground box-end wrench. Should I heat them? Any incantations I could try? I will *not* be happy if this turns into an extraction exercise on top of what has already gone down
1.b)
Could the flaky (but still functional)water pump cause my no heat condition by itself? Or am I definitely looking at some sort of multi-fault situation? (Clogged monovalve, bad monovalve, bad aux water pump etc)
Thanks as always,
dd
PS My expansion tank seems to fissuring near the pressure cap...sweeeeeet. Fastlane here I come....