On my 380SL, you remove the ashtray and there are 2 screws holding the ashtray frame. Once the frame is removed, there are only 2 more screws that hold the wood console in place. Be careful. At the front (part closest to the trunk) of the wood, where it curves down, is a pin (pointing to the engine) that keeps the front of the wood console in place. It will break easily if you try to "lift" the console. One you remove those 2 screws, you SLIDE the console slightly toward the trunk and then gently lift. THAT pin breaks easily.

Not sure if the same on your SL but perhaps some of info is helpful.

__________________
Jim