|
Actually, each seat is bolted to another piece of frame which the motors are attached. If you can swap the top part then you don't have to worry about the wiring. I think yours has seat memory box under the driver seat.
After you got the seat out of the car, flip the seat upside down. They are 6 big philips screws, you might need a impact screw driver to get them loose. not all of them are visible but you can jump the 1st electric motor(facing the seat) to position the sliding rail out of the way. for those two screws in the middle there is a hole on each rail and you need to position it on top of the screw to get to it.
I got 87 420SEL seats in my 83 300SD(no seat memory). driver side has memory box and the connectors are different. that's why I swapped them. I think they can be done. I'm not sure about the armrest...
__________________
BJ
09 GL320 Bluetec 65K+
07 E320 Bluetec 43k+
05 Nissan Frontier NISMO 4X4 72K+
07 Kawasaki Vulcan 900 5k+ gone
87 300SDL 158k+ gone
91 300D 113k+ gone
83 300SD 220K+ gone
89 300E sold
87 190E sold
83 380SEL sold
http://banners.wunderground.com/bann...TX/Houston.gif
|