View Single Post
Old 02-01-2002, 03:43 PM
Posts: n/a
Sorry for the last post -was not trying to belittle you - if you look under car you will see roughly where the screw comes out - if it goes into the floor but not through it - you should see an intentation under the car where you kept hitting the screw as it bounced back. Make sure nothing under the car is in the way (like catalytic converter heat shield, exhaust shield etc) then as a last resort drill out screw through to bottom of floor (underside of car) - tap and put in bolt. If you don't think there is enough threads for strength - put on a washer and lock waher and nut from bottom of car, tighten and cover nut with a little roofing tar to prevent rust.
Reply With Quote