View Single Post
  #6  
Old 12-10-2007, 05:34 PM
danwashuk danwashuk is offline
Dan
 
Join Date: Oct 2007
Location: Tucson, Az.
Posts: 55
Hi Jim.............You should be able to use a philips screw driver and at a 45 degree angle, get after that screw. On the other side of the panel there is a nut attached to the door with a clip. Sort of a threaded clip. Since it is sheet metal and only one thread in thickness it could be stripped. Applying a little pressure to the door pull as you unscrew it could help..........Dan
Reply With Quote