well.... i loosened each fuel line...and it seems like the culprit is cylinder 3.
I changed the number three wire from the 260e... no difference.
pulled the valve cover... everything LOOKS normal.
Is it possible the cause for the miss is a valve stem seal that is not seated properly? I did pull the spark plug from that cylinder and it was clean.. I think i will pull the others and take a look... of course the car has only been run a couple of miles since the stem seal change
I probably should have changed out a spark plug first...but the ones in there are the non-resistor bosch's that i just put in in the spring.
__________________
1989 300ce 129k
( facelifted front,updated tail lights, lowered suspension,bilstein sports, lorinser front spoiler, MOMO steering wheel, remus exhaust,stainless steel brake lines). (Gone)
1997 s320 154k (what a ride). Sold with 179k miles. Replaced with Hyundai Equus
1994 e320 Cabriolet 108k
1972 280se 4.5 153k Owned for 12 yrs, sorry I sold it
[/SIGPIC]
Last edited by lee polowczuk; 12-15-2007 at 02:30 PM.
|