I have a similar problem with my 88 560SL. The passenger window sometimes gets stuck on the outside of the weather strip and I have to lower the window and re-raise it to get it to seat correctly. I have adjusted the window frame and it has helped some but there is still a lot of wind noise coming from the back. The problem with my top is that it sits about 1/4" to 1/2" higher where the rear center locking pin latches than the two side locking pins. In other words if you look at the crome molding on the bottom of the hardtop it is at a slight angle from front to back. Is there any way to adjust the rear locking pin?
__________________
Hud
88 560SL
97 E320
|