Quote:
Originally Posted by tobybul
Thanks, Fellas. My 3/8" drive set has several extensions. Hopefully, the 3/8 drive will be beefy enough.
My TD is a non-turbo. Does this mean it might go even better? I have not investigated the project yet. Don't even know which side the starter is.
Also, where did you get your starters?
|
There may be too much flexing with 3/8 extensions if so go right to 1/2 inch. You have to transfer the torque not radically twist the 3/8 extensions. A 1/2 inch breaker bar is usually required as well. That top bolt can be tight.
Thank me for posting this as your bolt will now almost fall out because I suggested it might be difficult.
Make sure your metric allen bit is bottomed in the fastening as well. This is one bolt you do not want to mess up.