View Single Post
Old 06-16-1999, 12:47 AM
John H
Posts: n/a
Continuity of switch ckecks out OK. Additionally I swapped the leads on the back of the terminal block and what should have been the dead side of the switch functions fine. To me, these tests indicate the switch is not the problem.
I also checked the voltage going to seat all switchs. All of the poles which control seat action have voltage (11+ volts) while the one seat function in question does not. This was done at the terminal block when unplugged from the switches.
Has anyone ever had a seat control box fail? Is there a way to test? I would prefer to test rather that throw parts at the problem.
Thanks for taking the time.

John H.