View Single Post
Old 03-04-2008, 10:59 AM
JFawcett JFawcett is offline
Registered User
Join Date: Mar 2007
Location: Houston, Texas
Posts: 211
PAY SOMEONE TO DO THIS! Once you get into the door you have about 3 inches to get a 7 inch part into the door. You also have to remove the window motor. The picture is the correct part for the 107. The 129's use a less engineered "strap." You might be able to lubricate to reduce noise OR replace spring. The brass part of the door check is inside the door - the allen screw on the door jamb is what holds it in place. MAJOR PIA!
Reply With Quote