Thread: window motor
View Single Post
  #6  
Old 03-08-2008, 05:31 PM
Badtothebone Badtothebone is offline
Registered User
 
Join Date: Jun 2007
Posts: 3
I just pulled my window motor out of the passenger side. I removed the nuts/bolts that secure the whole track mechanism to the inside of the door. 2 of the motor bolts can be removed from an access hole by moving the whole track to line the bolt with the access hole. The 3rd would not line up with the access hole so I used a small ratchet and 10mm socket. I took the motor housing off and saw that the plastic gear was stripped in one area which is why my window would stop moving up or down after a sec or 2.
Reply With Quote