Quote:
Originally Posted by thorsen
I removed the back glass from my 1972 250C (w114) 3 months ago. There is a flat braid wire that runs on the edge of the glass from about 1/2 way down the glass to the corner. Notice that I said edge - it is neither on the outside nor the inside of the glass.
The gasket has one hole in each corner - the wires from the trunk come up, through the hole in the gasket, and are soldered to the flat braided wire.
Let me know if this doesn't make sense. I can take a picture of the glass if it will help.
|
Same setup on the sedan.
Window needs to be pulled to see the connection.
Test the continuity from feed wire to the vertical strip on window glass edge to verify a connection. Same on Pax side for ground.
Jim
__________________
14 E250 BlueTEC black. 45k miles
95 E320 Cabriolet Emerald green 66k miles
94 E320 Cabriolet Emerald green 152k miles
85 300TD 4 spd man, euro bumpers and lights, 15" Pentas dark blue 274k miles
|