I GOT IT.!

There are no screws anywhere.
The screws at the bottom of the bracket only hold the bracket to the car, but does not free up the OVP.

Here's the trick.

Lift only the rear portion of the OVP, leaving the front part snug with the bracket. The rear tab comes out of the bracket
Slide the OVP backwards, it will free up the front mounting tab from the front bracket.
Lift the front of the OVP while pulling forward, this will free up the rear tab.

The engineers who designed this system must have spent 3 months on the drawing table.

Thanks guys.

Note: Even with a new OVP, I still have my hard cold start problem.