View Single Post
  #33  
Old 04-23-2008, 01:31 AM
Arthur Dalton Arthur Dalton is offline
Registered User
 
Join Date: Aug 1999
Location: Florida / N.H.
Posts: 8,804
Quote:
Originally Posted by Phalcon51 View Post
Well, I checked the temp sensor today and both sides read the same. I cleaned the connectors with DeOxit and reassembled them. Next I cleared the codes. I'll take it out for a drive later and see if the codes come back or not.
Very Good....if they read the same, it was most likely a poor connection, thereby changing/varying the ohms value....
__________________
A Dalton
Reply With Quote