View Single Post
  #5  
Old 03-10-2002, 12:42 PM
mplafleur's Avatar
mplafleur mplafleur is offline
User Friendly
 
Join Date: Sep 2001
Location: Lathrup Village, Michigan
Posts: 2,939
I removed mine after the head was off. I placed a small block of wood into the flex plate bolted to the torque converter. This was through the inspection hole on the front side of the converter. The wood would lodge itself against the housing and prevent the crank from moving.

Good luck.
__________________
Michael LaFleur

'05 E320 CDI - 86,000 miles
'86 300SDL - 360,000 miles
'85 300SD - 150,000 miles (sold)
'89 190D - 120,000 miles (sold)
'85 300SD - 317,000 miles (sold)
'98 ML320 - 270,000 miles (sold)
'75 300D - 170,000 miles (sold)
'83 Harley Davidson FLTC (Broken again) :-(
'61 Plymouth Valiant - 60k mikes
2004 Papillon (Oliver)
2005 Tzitzu (Griffon)
2009 Welsh Corgi (Buba)

Reply With Quote