Quote:
Originally Posted by dabenz
Ahem.... ....back to the topic at hand, and politely at that (and that's what we're supposed to be here for).
Go to www.napafilters.com and fish around. Then hit the "Contact Us" button at the top and call the toll-free number.
daBenz uses the NAPA 3369, mounted before the stock in-line primary filter (overkill but clean fuel is happy fuel). Mounting plate is a thin rectangle with a snap-over clip, and has the holes for you to install your own petcock. I like seeing what is happening. |
I did notice that Forced had a stock primary filter on the feed line to his separator and was wondering if there is another primary on the outfeed but I guess one on the out side wouldn't help because I would think the separator filter is of a smaller micron than the primary. Correct? Sounds like thats where you have yours mounted though.
And I'm with you on seeing what is happening. Not much on wiring so I would prefer one without the idiot light. One with a clear bowl would be ideal.
Thank you for bringing us back on topic and thanks for the help.
