Quote:
Originally Posted by feam
Hello,
Need help changing belt on a 96 300d. (606)
Ive read about removing fan and pully.
Ive read just remove shock, and tensioner slacks.
any help is appreciated.
Thanks
|
No need to remove the fan or pulley, part # 83 has a hole in it where you put a steel rod of your choosing in. Remove nut #119, and using the steel rod, you can apply pressure to release the tension on bolt#113, allowing you to move bolt #113 towards the rear, which will allow part #83 to pivot while you control the release of tension with the rod you installed in the hole. Your owners manual shows the diagram of how the belt is installed. I was able to remove my old one, and install a new one using this procedure. Takes a little bending and weaving of the rubber belt, but it can be done with a little patience. Good luck
http://www.detali.ru/cat/oem_mb2.asp?TP=1&F=210020&M=606%2E912&GA=722%2E438722%2E600&GM=717%2E446&CT=M&cat=19T&SID=20&SGR=045&SGN=03