Quote:
Originally Posted by M.B.DOC
Since you swapped injectors & there isn't any difference, then moving the pre-chamber would be the next logical step.
I assume that the problem isn't lifter noise related.
Also is that glow plug warming that cylinder? Have you tried a new glow plug on that cylinder?
|
hello
I had the lifters removed earlier and tried to compress them but they all seemed very hard to compress.
Today I checked the resistance in the glowplugs.The readings were 1,3-1,4 ohms with my cheap meter.
Concerning the prechamber I already tried to remove it from cyl 2 but I could not get that thread ring to move although I tried really hard.Maybe I could try again with warmer engine but Im afraid of spoiling those threads in the cyl head.