bought a real garrett t3/60-1 .7/.63. Polished it up a bit on a boring hot day but i have to do a lot of refitting because its so much smaller. My car is setup for 400hp but with a quick injector change 500 with no head trouble will be fine

that intercooler is about the same size as myne. but i chopped and bent into that front bumper support slightly to get it to sit up higher inside my bumper,
what is ur setup for 400hp? the 310cc injectors i am using are to small even for 8psi, at standard fuel pressure, and i would need to up fuel pressure to get adequate fuel at 8psi, or if i plan on going up to 10psi need 400cc+ injectors. and thats with my smaller 2.8ltr capacity