Im doing a simple fuel controlling setup for engine management and using an Apexi SAFC NEO.
Those bends are at a more gentle angle at the ends and the same 90 degree angle as the stock manifolds. The piping is a little over 2 inches versus the stock which is under 1.5 inches when round. Im not sure what you mean by the wastegate. The wastegate can be anywhere on the manifold and still do its job with the efficiency on a log style manifold, also its less than 3 inches away from the turbo anyway, must be the angle that makes it seem different. I made the log style for space and its generally cheaper but also they can make more power that an equal length style.
|