MB alignments are height dependant! That is why "most" alignment shops don't have specs for rear camber.
There are specs but they are different for different ride heights & must be programmed into alignment depending on measured ride height.
The readings you have are for a VERY lowered car!
Less than -2 deg of camber won't cause excessive tire wear, but the -3 deg in the rear will cause tire wear.
MERCEDES Benz Master Guild Technician (6 TIMES)
ASE Master Technician
Mercedes Benz Star Technician (2 times)
44 years foreign automotive repair
27 Years M.B. Shop foreman (dealer)
MB technical information Specialist (15 years)
190E 2.3 16V ITS SCCA race car (sold)
1986 190E 2.3 16V 2.5 (sold)