So what I did was I cut the metal device up on top and snipped one of the connections inside the box. Result = no noise. I took a 2 part epoxy glue and glued the lid back on top
Later, I may find a suitable, more pleasant door chime like from another vehicle. But for now, NO annoying buzzer. Woot!
Pic 5a: Buzzer case opened
Pic 5b: Buzzer metal thing cut down
Pic 6: After I cut it down, I put the housing back on and put a sticker labeled "buzzer" so I dont forget in the future when I put on a new door buzzer chime
|