Another (easier) option is Liquid Nails. Two or three of the smaller-size tubes are plenty for one hood pad. Works great, even in high heat areas (FL, TX, AZ, etc). I've heard that this stuff can be hard to remove but I don't plan on changing the pad a second time, lol. I've done 3 or 4 this way so far. No worries about overspray, either. Only hassle is you need to press the new pad into the adhesive beads by hand, all over, and this takes more effort than you might think. But you can re-position the pad if necessary. The 3M Super spray will probably stick on contact, the downside being you have little if any time to re-position the pad if you didn't get it located perfectly.
