Remember, for front rotors, you will need to insert three lug bolts for the 2x4 to press against. You can't press against the grease cap!
I just used this method again last night to replace the front rotors on my S500. It worked like a charm once again!
It is a little awkward holding the board against the hub and positioning the two c-clamps, but it can be accomplished without too much trouble.
Good Luck! You can do it!
__________________
02 S500
92 500SL
92 400E (Sold)
87 300E (Sold)
83 300D Turbo (Sold)
75 300D (Sold)
74 240D (Sold after 20 years)
|