View Single Post
Old 07-31-2008, 09:46 AM
vstech's Avatar
vstech vstech is offline
Join Date: Mar 2006
Location: Mount Holly, NC
Posts: 26,290
you would have equal difficulty transplanting either engine into either body. the oil pans will hit the frames, cause the sumps are on opposite ends of the blocks... the 615 block will work out better in the A though. is this the one with the metal return lines? nice.
also, DO NOT MAKE LINES FROM COPPER!!! the injector lines are very thick steel lines, to handle the massive pressure from the IP. you can polish the outside, and copper plate the OUTSIDE, but explain to the plater that the ends MUST not be plated or plugged!
John HAUL AWAY, OR CRUSHED CARS!!! HELP ME keep the cars out of the crusher! A/C Thread
"as I ride with my a/c on... I have fond memories of sweaty oily saturdays and spewing R12 into the air. THANKS for all you do!

My drivers:
1987 190D 2.5Turbo
1987 190D 2.5Turbo
1987 190D 2.5-5SPEED!!!

1987 300TD
1987 300TD
1994GMC 2500 6.5Turbo truck... I had to put the ladder somewhere!
Reply With Quote