You can buy one of the brakeline bender tools at any decent auto parts place for under $10.
Here's one they sell at the Schucks/Checker/Kragen chains of stores http://www.partsamerica.com/ProductDetail.aspx?MfrCode=PBI&MfrPartNumber=648484&CategoryCode=3498
It will do smooth bends in 5 different sizes of tubing - looks like 1/8", 3/16", 1/4", and 5/16". IIRC the injector lines are 5 mm or 6 mm, so the 3/16" or 1/4" should work...
__________________
1984 300 Coupe TurboDiesel
Silver blue paint over navy blue interior
2nd owner & 2nd engine in an otherwise
99% original unmolested car
~210k miles on the clock
1986 Ford F250 4x4 Supercab
Charcoal & blue two tone paint over burgundy interior
Banks turbo, DRW, ZF-5 & SMF conversion
152k on the clock - actual mileage unknown
|