Research so far.
Based on the codes taken and research here and elsewhere, I have several obvious items to deal with.
Pin 8
Code 4 - MAF sensor trouble. I will get some MAF cleaner and try to clean this out this week and hopefully wipe this code. I also found a link on how to troubleshoot the unit from another thread -
http://www.ms-motor-service.com/ximages/pg_si_0079_en_web.pdf
Code 25 - CMP sensor bad - Haven't figured this out yet.
Code 33 - Max retard setting reached - symptom of other problems or reaction to MAF or CMP sensor troubles?
Code 42 - CAN communication from EA/ISC module faulty - is this due to the CA to Federal conversion?
Pin 14
Code 4 - Stop lamp switch error? Sounds like I need a replacement switch. COuld this be triggering the ABS light?
Code 11 - Fuel Shutoff to LFI-SF module?? GOt an HM system so I must be looking at the wriong code sheet.
Pin 6 - Was not able to find code sheets for my model but this is either the SRS or ABS module.
Tasks in short term
Replace Stop Light Switch (or check wiring first)
Clean MAF