Quote:
Originally Posted by tangofox007
The discharge port uses the green seal, Factory Air part #24357. The suction port uses the yellow (gold) seal, #24358.
Due to the forum rules, I cannot provide the NAPA part numbers. But if you need them, do a search for TEM 407278 and TEM 407279.
|
That is what it was. I had to switch the rubber from the gold and red so that the metal "steps" and the rubber seals would sit level.
But that was on a Hodyon (Hancock Ind) new compressor. I'm sure it can be different with other builders and rebuilders.
__________________
RRGrassi
70's Southern Pacific #5608 Fairmont A-4 MOW car
13 VW JSW 2.0 TDI 193K, Tuned with DPF and EGR Delete.
91 W124 300D Turbo replaced, Pressure W/G actuator installed. 210K
90 Dodge D250 5.9 Cummins/5 speed. 400K
|