Quote:
Originally Posted by kknudson
LED with resistor ?????
Can you provide a little more detail, I am very handy, just want to make sure I get it right.
|
LED 276-270 works. So does 276-209. The difference is one has hardware for mounting in a hole and the other does not. To facilitate connections I use banana plugs (picture).
You don't need the LED to read codes for the roll bar or soft top controller on a '90-'93 SL. After shorting the appropriate diagnostic socket watch the light in the top switch for soft top codes or the malfunction lamp in the instrument cluster for roll bar codes.