View Single Post
Old 08-02-1999, 09:55 PM
Posts: n/a
Tweeking of injection pump is best left to the professional that has pump bench at his disposal. The rocking at idle can most likely be attributed to a wornout rack dampener spring. This is a Bolt with a set nut on the rear of your injection pump. About 1/2 way down, alittle hard to see/get to. This bolt has a small plunger in it that has a spring behind it. The rack of the pump sets on the plunger at idle and it dampens the bouncing of the rack. Partis only a few dollars and to have it installed professionaly would be a good investment. Good Luck with your cross country relocation. I've been through it and do not enviy you.