View Single Post
Old 04-02-2002, 12:04 AM
Tom 260E Tom 260E is offline
Registered User
Join Date: Feb 2002
Location: Phoenix, AZ
Posts: 39
exhaust removal

I replaced both the center and rear mufflers on my 1989 260e last fall and ran into the same problem. I ended up using a cutting wheel on a pneumatic die grinder. I made a cut in the pipe where it slips over the pipe from the cat to relieve the death grip the rust had created. You have to be very careful not to cut into the inner pipe when making the cut length-wise . good luck Tom
Reply With Quote